{"product_id":"cold-air-intake-kit-for-2012-2018-jeep-wrangler-jk-3-6l-v6-pentastar","title":"Flashark Cold Air Intake Kit for 2012-2018 Jeep Wrangler JK 3.6L V6 Pentastar","description":"\u003cp\u003eThe factory airbox on your 2012-2018 Jeep Wrangler JK 3.6L Pentastar V6 chokes airflow with a narrow, convoluted intake tract designed for quiet cruising — not for delivering the air your engine craves on the trail or the highway. The Flashark Cold Air Intake Kit replaces that restrictive stock box with a smooth 3-inch (76mm) mandrel-bent aluminum tube, a high-flow dry cotton gauze filter, and a sealed heat shield that pulls cooler, denser air from outside the engine bay.\u003c\/p\u003e\n\n\u003cp\u003eThe result is a measurable improvement in throttle response, a deeper intake growl under acceleration, and an estimated 7-10% horsepower gain (20-29 HP) with 5-7% more torque (13-18 lb-ft) — all without requiring a tune. The black powder-coated finish resists under-hood heat and corrosion, while the dry filter means no messy oiling and no risk of MAF sensor contamination. Bolt-on installation takes about 45 minutes with basic hand tools. No cutting, no drilling, no check engine lights.\u003c\/p\u003e\n\u003cp\u003e⚠️ Note: This intake is designed for the 3.6L Pentastar V6 only. It does NOT fit the 2.0L turbo, 3.0L EcoDiesel, or 3.8L V6 (2007-2011) Wrangler models.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e3\" (76mm) Mandrel-Bent Aluminum Tube \u003c\/strong\u003e— Smooth, unrestricted airflow path replaces the factory corrugated tube; black powder-coated finish for heat resistance and corrosion protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry Cotton Gauze Filter\u003c\/strong\u003e — No Oil Required — High-flow washable dry filter element; no oiling means zero risk of MAF sensor contamination, a common issue with oiled filters on the Pentastar V6\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Heat Shield with Edge Trim\u003c\/strong\u003e — Isolates the filter from engine-bay heat, drawing cooler, denser air for consistent power delivery; black edge trim ensures a snug seal against the hood liner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Tune Required\u003c\/strong\u003e — Plug-and-play bolt-on design; works with factory ECU programming without triggering a check engine light or requiring a custom tune\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeeper Intake Growl\u003c\/strong\u003e — Replaces the muffled factory intake note with a more aggressive induction sound under load — without being obnoxiously loud at idle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashable \u0026amp; Reusable Filter\u003c\/strong\u003e — Clean and re-oil-free maintenance every 15,000-20,000 miles (more frequently in dusty off-road conditions); saves money over disposable paper filters\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Bolt-On Kit\u003c\/strong\u003e — Includes all necessary couplers, clamps, hardware, and installation guide; typical install time 30-45 minutes with basic hand tools\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e: BQM0004005\u003cbr\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e: Flashark\u003cbr\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e: 2012-2018 Jeep Wrangler JK (2-door \u0026amp; 4-door Unlimited)\u003cbr\u003e\u003cstrong\u003eEngine\u003c\/strong\u003e: 3.6L V6 Pentastar (Chrysler ERV)\u003cbr\u003e\u003cstrong\u003ePipe Diameter\u003c\/strong\u003e: 76mm (3.0\")\u003cbr\u003e\u003cstrong\u003ePipe Material\u003c\/strong\u003e: Aluminum piping \u003cbr\u003e\u003cstrong\u003eTubing Finish\u003c\/strong\u003e: Black powder-coated\u003cbr\u003e\u003cstrong\u003eFilter Type\u003c\/strong\u003e: Dry cotton gauze\u003cbr\u003e\u003cstrong\u003eFilter Color\u003c\/strong\u003e: Red\u003cbr\u003e\u003cstrong\u003eHeat Shield\u003c\/strong\u003e: Black powder-coated steel with edge trim\u003cbr\u003e\u003cstrong\u003eCouplers\u003c\/strong\u003e:  Silicone reducer couplers\u003cbr\u003e\u003cstrong\u003eClamps\u003c\/strong\u003e: Stainless steel T-bolt clamps\u003cbr\u003e\u003cstrong\u003eCEL Risk\u003c\/strong\u003e: None (designed to work with stock MAF sensor readings)\u003cbr\u003e\u003cstrong\u003eInstallation Time\u003c\/strong\u003e: 30-45 minutes\u003cbr\u003e\u003cstrong\u003eTools Required\u003c\/strong\u003e: Basic hand tools (socket set, screwdriver, pliers)\u003cbr\u003e\u003cstrong\u003eFilter Maintenance\u003c\/strong\u003e: Clean every 15,000-20,000 miles (5,000-10,000 in dusty conditions)\u003cbr\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e: 1 Year\u003cbr\u003e\u003cstrong\u003eEmissions Note\u003c\/strong\u003e: 50-state legal (does not modify emissions systems)\u003cbr\u003e\u003cstrong\u003eCustomer Service\u003c\/strong\u003e: service@flasharkracing.com\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cp\u003e1x Black powder-coated aluminum intake tube (76mm \/ 3.0\")\u003cbr\u003e1x Red dry cotton gauze cone filter\u003cbr\u003e1x Black powder-coated steel heat shield\u003cbr\u003e1x Black edge trim (for heat shield sealing)\u003cbr\u003e2x Silicone reducer couplers\u003cbr\u003e1x Rubber ventilation hose\u003cbr\u003e4x Stainless steel T-bolt clamps\u003cbr\u003e1x Installation hardware kit (bolts, washers, nuts, brackets)\u003cbr\u003e1x Installation instructions manual\u003c\/p\u003e","brand":"Flashark","offers":[{"title":"Default Title","offer_id":52083519193386,"sku":"FLBQM0004005","price":138.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0293\/4423\/5619\/files\/Flashark-Cold-Air-Intake-Kit-for-2012-2018-Jeep-Wrangler-JK-3.6L-V6-Pentastar-Flashark-110669038.webp?v=1784169358","url":"https:\/\/flasharkracing.com\/es\/products\/cold-air-intake-kit-for-2012-2018-jeep-wrangler-jk-3-6l-v6-pentastar","provider":"Flashark","version":"1.0","type":"link"}