{"product_id":"cold-air-intake-kit-for-audi-b8-b8-5-s4-s5-q5-sq5-v6t","title":"Cold Air Intake Kit for Audi B8\/B8.5 S4, S5, Q5, SQ5 V6T","description":"\u003ch3\u003e🏁 Your Supercharged V6. Finally Breathing.\u003c\/h3\u003e\n\u003cp\u003eThe 3.0L V6 Supercharged engine in your Audi is a refined, high-revving powerhouse. The factory intake system was designed for one thing: keeping the supercharger quiet and meeting emissions standards.\u003c\/p\u003e\n\u003cp\u003eThat means a box full of baffles, restricted tubing, and a paper filter that chokes the supercharger at peak boost.\u003c\/p\u003e\n\u003cp\u003eFlashark's intake eliminates all of it:\u003c\/p\u003e\n\u003cp\u003e→ Unrestricted 76mm smooth-bore tubing throughout — no flow-killing bends\u003cbr\u003e→ Dry high-flow filter — more surface area than the factory paper element\u003cbr\u003e→ Sharper throttle response under full boost (supercharger is always pulling)\u003cbr\u003e→ +10-20 whp \/ +15-25 wtq on stock tune\u003cbr\u003e→ No check engine light\u003cbr\u003e→ Direct bolt-on in 2 hours\u003c\/p\u003e\n\u003cp\u003eYour supercharger has been waiting for this.\u003c\/p\u003e\n\u003ch3\u003eBEFORE YOU BUY — READ THIS\u003c\/h3\u003e\n\u003cp\u003e• Stock ECU \/ No tune:\u003c\/p\u003e\n\u003cp\u003e✅ Fully compatible (no tune required on any supercharged V6)\u003c\/p\u003e\n\u003cp\u003e• With Tunes (APR, Unitronic, ECO, etc.):\u003c\/p\u003e\n\u003cp\u003e✅ Gains increase with tuned ECUs\u003c\/p\u003e\n\u003cp\u003e• With bolt-ons (downpipes, exhaust, intercooler):\u003c\/p\u003e\n\u003cp\u003e✅ Maximum performance when combined\u003c\/p\u003e\n\u003cp\u003e• CARB compliance:\u003cbr\u003e⚠️  Not CARB-exempt — racing\/off-road use only (not for use on public roads in CA, NY, and other CARB states)\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003eSystem Type: Cold Air Intake (CAI)\u003cbr\u003eTubing Material: 6061-T6 Aluminum\u003cbr\u003eTubing Finish: Polished \/ Black Powder Coat\u003cbr\u003eTube Diameter: 76mm — large bore throughout (no reducer) matches supercharger inlet\u003cbr\u003eAir Filter: High-Flow Dry Cotton (washable \u0026amp; reusable) No oil required — maintenance-free\u003cbr\u003eHeat Shield: Included — separates intake from engine bay heat\u003cbr\u003eMAF Housing: CNC-machined 76mm aluminum precise bore = no CEL on V6T\u003cbr\u003eCouplers: Multi-ply silicone (black\/silver) high-temp rated for supercharged heat\u003cbr\u003eClamps: Stainless steel T-bolt (all hardware)\u003cbr\u003eInstallation: 100% Bolt-On, No welding, no drilling\u003cbr\u003eHardware: All included (OEM replacement)\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e🔧 Why Flashark? 5 Reasons\u003c\/h3\u003e\n\u003cp\u003e1️⃣  DESIGNED FOR THE SUPERCHARGER\u003c\/p\u003e\n\u003cp\u003eThe V6T's supercharger is always spinning — it doesn't care if you're at 2,000 RPM or 6,500 RPM. The factory intake is engineered to meet noise and emissions standards, not flow targets.\u003c\/p\u003e\n\u003cp\u003eFlashark's 76mm smooth-bore aluminum intake provides:\u003cbr\u003e• Unrestricted airflow at all RPMs\u003cbr\u003e• Reduced turbo\/supercharger lag\u003cbr\u003e• Smoother MAF signal = better fuel trim\u003c\/p\u003e\n\u003cp\u003e→ No check engine light\u003cbr\u003e→ No tune required\u003cbr\u003e→ Instant throttle response improvement\u003c\/p\u003e\n\u003cp\u003e2️⃣  DRY FILTER — NO OIL, NO MESS\u003c\/p\u003e\n\u003cp\u003eUnlike cotton-oiled filters that require periodic re-oiling, Flashark's dry media filter:\u003cbr\u003e• Wash and reinstall — no oil needed\u003cbr\u003e• Never risk over-oiling and coating MAF\u003cbr\u003e• Better dust filtration than cotton\u003cbr\u003e• Lasts the life of your Audi\u003c\/p\u003e\n\u003cp\u003eMaintenance: Vacuum or rinse clean every 15,000-20,000 miles.\u003c\/p\u003e\n\u003cp\u003e3️⃣  LARGER DIAMETER vs. FACTORY RESTRICTION\u003c\/p\u003e\n\u003cp\u003eThe factory intake tube has internal diameter restrictions and baffles that create turbulence before the MAF sensor. Flashark's 76mm mandrel-bent aluminum provides:\u003cbr\u003e• 40%+ larger flow area than factory\u003cbr\u003e• Smooth airflow path (no turbulence)\u003cbr\u003e• Lower intake air temps vs. stock box\u003c\/p\u003e\n\u003cp\u003e4️⃣  COLD AIR INTAKE vs. HOT ENGINE BAY\u003c\/p\u003e\n\u003cp\u003eThe included airbox enclosure holds the filter in the coldest zone of the engine bay — away from the supercharger heat and radiator outlet.\u003c\/p\u003e\n\u003cp\u003eEven with the supercharger running hot, Flashark's heat-separation design keeps intake temps down under full boost.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e5️⃣  BOLT-ON IN 2 HOURS — NO CUTTING\u003c\/p\u003e\n\u003cp\u003eVehicle-specific design for B8\/B8.5 V6T. No cutting, no drilling, no custom work.\u003c\/p\u003e\n\u003cp\u003eTools needed: Basic hand tools (ratchet, T20\/T25 Torx, 10mm sockets). Estimated time: 1.5-2 hours\u003c\/p\u003e","brand":"Flashark","offers":[{"title":"Default Title","offer_id":51418623344938,"sku":"FLIS25065","price":278.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0293\/4423\/5619\/files\/IS25065-Flashark-107479639.webp?v=1776067624","url":"https:\/\/flasharkracing.com\/es\/products\/cold-air-intake-kit-for-audi-b8-b8-5-s4-s5-q5-sq5-v6t","provider":"Flashark","version":"1.0","type":"link"}