{"product_id":"flashark-cold-air-intake-kit-for-2018-2024-jeep-wrangler-jl-gladiator-jt-3-6l","title":"Flashark Cold Air Intake Kit for 2018-2024 Jeep Wrangler JL \u0026 Gladiator JT 3.6L","description":"\u003cp\u003eThe 3.6L Pentastar V6 in your 2018-2024 Jeep Wrangler JL or Gladiator JT is a proven powerplant — but the factory airbox suffocates it with a narrow, sound-tuned intake tract designed for cabin quietness, not performance. The Flashark Cold Air Intake Kit replaces that restrictive stock assembly with a smooth 3-inch (76mm) mandrel-bent aluminum tube, a high-flow dry cotton gauze filter, and a sealed heat shield that draws cooler, denser air from outside the engine bay.\u003c\/p\u003e\n\n\u003cp\u003eThe result is an estimated 7-10% horsepower gain (20-29 HP) and 5-7% more torque (13-18 lb-ft), with noticeably sharper throttle response and a deeper intake growl under acceleration. The black powder-coated finish resists under-hood heat and corrosion, while the dry filter eliminates the messy oiling process and MAF sensor contamination risk common with oiled filters on the Pentastar platform. Bolt-on installation takes about 30-45 minutes with basic hand tools — no cutting, no drilling, no tune, no check engine lights.\u003c\/p\u003e\n\u003cp\u003e⚠️ Note: This intake is designed for the 3.6L Pentastar V6 only. It does NOT fit the 2.0L turbo I4, 3.0L EcoDiesel V6, or 6.4L V8 (Rubicon 392) models. It also does NOT fit the 2012-2018 Wrangler JK — that is a different platform requiring a different intake kit (BQM0004005).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3\" (76mm) Mandrel-Bent Aluminum Tube\u003c\/strong\u003e — Smooth, unrestricted airflow path replaces the factory corrugated intake tube; black powder-coated finish for heat resistance and corrosion protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry Cotton Gauze Filter\u003c\/strong\u003e — No Oil Required — High-flow washable dry filter element; no oiling means zero risk of MAF sensor contamination, a known issue with oiled filters on the 3.6L Pentastar V6\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Heat Shield with Edge Trim\u003c\/strong\u003e — Isolates the filter from engine-bay heat, pulling cooler, denser air for consistent power delivery; black edge trim ensures a tight seal against the hood liner\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eEstimated 7-10% Horsepower Gain (20-29 HP) \u003c\/strong\u003e— Based on stock 285 HP 3.6L Pentastar; eTorque-equipped models see similar gains; actual results vary with altitude, fuel quality, and vehicle condition\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated 5-7% Torque Gain (13-18 lb-ft)\u003c\/strong\u003e — Improved low-to-mid range torque for better crawling response off-road and smoother highway merging\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeeper Intake Growl\u003c\/strong\u003e — Replaces the muffled factory intake note with a more aggressive induction sound under load — noticeable under acceleration but quiet at idle and cruise\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashable \u0026amp; Reusable Filter\u003c\/strong\u003e — Clean every 15,000-20,000 miles (5,000-10,000 in dusty off-road conditions); saves money over disposable paper filters and reduces waste\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Bolt-On Kit\u003c\/strong\u003e — Includes all couplers, clamps, hardware, and installation guide; typical install time 30-45 minutes with basic hand tools; reversible to stock at any time\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e: BQM0004006\u003cbr\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e: Flashark\u003cbr\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e: 2018-2024 Jeep Wrangler JL (2-door \u0026amp; 4-door Unlimited) \u0026amp; 2020-2024 Jeep Gladiator JT\u003cbr\u003e\u003cstrong\u003eEngine\u003c\/strong\u003e: 3.6L V6 Pentastar (345 cu.in.)\u003cbr\u003e\u003cstrong\u003ePipe Diameter\u003c\/strong\u003e: 76mm (3.0\")\u003cbr\u003e\u003cstrong\u003ePipe Material\u003c\/strong\u003e: Aluminum piping\u003cbr\u003e\u003cstrong\u003eTubing Finish\u003c\/strong\u003e: Black powder-coated\u003cbr\u003e\u003cstrong\u003eFilter Type\u003c\/strong\u003e: Dry cotton gauze (no oil required)\u003cbr\u003e\u003cstrong\u003eFilter Color\u003c\/strong\u003e: Red\u003cbr\u003e\u003cstrong\u003eHeat Shield\u003c\/strong\u003e: Black powder-coated steel with edge trim\u003cbr\u003e\u003cstrong\u003eCouplers\u003c\/strong\u003e: Silicone reducer couplers\u003cbr\u003e\u003cstrong\u003eClamps\u003c\/strong\u003e: Stainless steel T-bolt clamps\u003cbr\u003e\u003cstrong\u003eHorsepower Gain\u003c\/strong\u003e: 7-10% (approx. 20-29 HP on stock 285 HP 3.6L Pentastar)\u003cbr\u003e\u003cstrong\u003eTorque Gain\u003c\/strong\u003e: 5-7% (approx. 13-18 lb-ft on stock 260 lb-ft)\u003cbr\u003e\u003cstrong\u003eTuning Required\u003c\/strong\u003e: No\u003cbr\u003e\u003cstrong\u003eCEL Risk\u003c\/strong\u003e: None (designed to work with stock MAF sensor readings)\u003cbr\u003e\u003cstrong\u003eInstallation Time\u003c\/strong\u003e: 30-45 minutes\u003cbr\u003e\u003cstrong\u003eTools Required\u003c\/strong\u003e: Basic hand tools (socket set, screwdriver, pliers)\u003cbr\u003e\u003cstrong\u003eFilter Maintenance\u003c\/strong\u003e: Clean every 15,000-20,000 miles (5,000-10,000 in dusty conditions)\u003cbr\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e: 1 Year\u003cbr\u003e\u003cstrong\u003eEmissions Note\u003c\/strong\u003e: Does not modify emissions systems; street-legal in most states\u003cbr\u003e\u003cstrong\u003eCustomer Service\u003c\/strong\u003e: service@flasharkracing.com\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cp\u003e1x Black powder-coated aluminum intake tube (76mm \/ 3.0\")\u003cbr\u003e1x Red dry cotton gauze cone filter\u003cbr\u003e1x Black powder-coated steel heat shield\u003cbr\u003e1x Black edge trim (for heat shield sealing)\u003cbr\u003e2x Silicone reducer couplers\u003cbr\u003e4x Stainless steel T-bolt clamps\u003cbr\u003e1x Installation hardware kit (bolts, washers, nuts, brackets)\u003cbr\u003e1x Installation instructions manual\u003c\/p\u003e","brand":"Flashark","offers":[{"title":"Default Title","offer_id":52083578732842,"sku":"FLBQM0004006","price":138.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0293\/4423\/5619\/files\/Flashark-Cold-Air-Intake-Kit-for-2018-2024-Jeep-Wrangler-JL-_-Gladiator-JT-3.6L-Flashark-110670397.webp?v=1784171183","url":"https:\/\/flasharkracing.com\/products\/flashark-cold-air-intake-kit-for-2018-2024-jeep-wrangler-jl-gladiator-jt-3-6l","provider":"Flashark","version":"1.0","type":"link"}