Amortiguadores tipo coilover

Fit perfectly in 1994 Miata. Great price. Not really stiff. Used for daily driving. Can drop about 5 inches (way. too. low.)

Removed old cat/manifold and installed with aftermarket cat from eBay. No it isn’t meant for an LX but it does fit. I also ran over a deer that someone else had hit, of course, the day after I installled it and it is all still in place and rock solid. Would buy again and recommend to others. Has been on for a few weeks.

At first no one wanted to install them because they wasn’t the high class name brand and because of the fittment. I found a shop (Johnny’s Garage) and he was up for the challenge. He pointed out a lot of flaws and by him being a welder he was able to do some modifications and fabrication. Curtain things didn’t align up such as the gaskets, the fitting of the headers that was too close to the undercarriage of the car and where the headers bolt on to the oem braket. Other than that he made it work and I was happy with the 3 day project waiting on parts… smh. I spent more than I was supposed too :( on this project because he was the only shop that wanted to take on this project. My car sounds amazing tho🫡 Thanks Flashark for your affordable price compared too others.

I ordered this header as a temporary replacement for a cracked "name brand" header. I'll be completely honest, due to the price I was not expecting anything great but I was surprised, it's actually pretty good.

I did have a hard time fitting the header. The two banks weren't spaced far enough apart so I did have to use a big pry bar and hammer to get bank 1 into the studs. After this, I was able to zip the bolts into the studs with no issues. The header did seem just a touch shorter than the "name brand" header I had before. Neither of these things were an issue for me, for the price it's about as great as I could have expected. Build quality seems on par with the other header I had and the O2 sensor locations are actually better (perfect IMO) on the flashshark header.
I don't expect the included gaskets to hold up forever, if I am able I will update this review next drift season.

I did wrap the header with DEI titanium heat wrap, the "polished" finish looked great before wrapping.

All In all, I bought this header for temporary use, but I'll be using it permanently because it seems like it's going to be completely fine, in fact better than a "name brand" header.

You will most likely struggle a little bit during install but for the price (which is REALLY GOOD) it is completely worth it.

I would recommend this header to a friend and I would buy another!

Looking for a dual exhaust setup for my 19 F150 5.0. Researched all the HIGH dollar systems and none had the sound or look I wanted. Stumbled on a video and there it was. The dual exhaust that had the look and sound I wanted. And best of all it was 1/3 the price of the others.
A bit skeptical when all I could find was 3 reviews and videos, but took the chance. It arrived in less then a week and when I opened, I was surprised at the quality, but still skeptical about fit.
Unboxed and laid everything out and started the install. The only thing I didn't see was instructions, but being a typical dude, I don't read instructions anyway. Got it all in loosely then started tightening and adjusting. Snugged everything up and took a quick ride, came back and made sure all stayed tight and in place and was done. All said and done taking my time, took about 3 hours start to finish.
Definitely don't regret this purchase, looks and sounds great and so far no drone at any rpm.

Installed was easy and quick. Great product and well under the price of some catch cans going for ridiculous prices! Thanks for giving us an alternative.

Specifically for the 9th gen civic si, you gotta take the bumper off to install this. It tucks into the front left lower part of your bumper. Remove the original air intake in total as well, the entire oem assembly.

Easy bolt on action. Definitely sits lower than the stock so watch out for scrapes. Sounds amazing. Definitely recommend!!

Great quality fits perfect i love it on my 92 CB7
Couldn't be happier im gonna but the header next!

I was very surprised by the quality of this catback, being so adorable, I thought i would be getting a very cheap, poorly welded exhaust. The welds look like what you'd expect out of an exhaust triple the price. And same goes for the sound! I highly recommend giving flashark a chance if your looking for an exhaust!

I never leave feedbacks when I buy stuff but I seen this hasn't been reviewed so I wanted to give my honest feedback to anyone looking to buy this exhaust setup and it seems to good to be true for the price. Honestly 10/10 easy install and sounds great too I have a full 3" downpipe and with this makes it sounds better than my old exhaust setup . If you guys are looking for a new exhaust setup for your wrx. Ill recommend it

SBC Alternator/Power Steering Pump Accessory Drive Bracket Kit for Double Hump Heads 305 327 350 383 5.0L 5.7L V8

I'm very pleased with my purchase so far. The pipe fit almost perfectly. Sounds good too. Highly recommend!

Bought the exhaust. Took awhile to get it due to being out of stock but once it was in stock they NDA it to me. Kept me in the loop about when it would be available also. Came as pictured. Was easy to install. Looks good and sounds good. Only real issue I had was they did not include the adapter to hook it up to the cat so I had to purchase it separately. Would like to see them add it to the kit but overall can't complain.

Item worked as it should and it’s a good quality