2003-2006 Hyundai Tiburon GT/SE 2.7L V6 Cat-Back Exhaust System
This Flashark cat-back exhaust system is made for the 2003-2006 Hyundai Tiburon GT and SE with the 2.7L V6 engine in the two-door coupe body. It replaces the factory exhaust from the catalytic converters rearward with 2.36 in (60 mm) 201 stainless steel piping, twin mufflers, and two 4-inch rolled tips in a dual rear-exit layout — a bolt-on kit that keeps your stock catalytic converters in place.
Specifications
| Product Type | Cat-Back Exhaust System (dual rear exit) |
|---|---|
| SKU | FLES08171 |
| Application | 2003-2006 Hyundai Tiburon GT / SE, 2.7L V6, Coupe 2-Door |
| Main Pipe Diameter | 2.36 in (60 mm) OD |
| Inlet / Outlet Diameter | 2.25 in ID / 2.25 in ID |
| Mufflers | Dual mufflers |
| Resonator | 1 |
| Tips | 2 × 4 in (101.6 mm) rolled tips |
| Exit Layout | Dual rear exit |
| Material | 201 stainless steel |
| Surface Finish | Polished |
| Installation | Bolt-on; no cutting required |
| Hardware Included | Gaskets, bolts, nuts |
| Brand | Flashark |
Key Features
- True Cat-Back Coverage: This kit replaces the exhaust run from the factory catalytic converters rearward through the mufflers to the tips, so the catalytic converters and their connections stay in place and no part of the emissions equipment ahead of them is touched.
- 201 Stainless Steel with a Polished Finish: The piping is 201 stainless steel with a bright, polished surface, formed with mandrel bends and fitted with CNC-machined, TIG-welded flanges, so the tubing and the rolled tips share the same finished look from the front of the kit to the rear.
- Twin Mufflers and One Resonator: The system is supplied as a complete dual-exit layout with two mufflers and one resonator in the pipe run, so the full muffler configuration ships as part of the kit.
- Dual 4-Inch Rolled Tips: Two 4 in (101.6 mm) rolled tips complete the dual rear-exit layout, with one tip on each side of the rear.
- Bolt-On Install with Hardware Included: The kit is designed to bolt on using the included gaskets, bolts, and nuts. With no cutting required, installation stays a bolt-on job rather than one that needs pipe modification.
What's Included
This kit includes the complete cat-back system for the 2003-2006 Hyundai Tiburon GT/SE 2.7L V6, along with the mounting hardware:
- Cat-back piping in 201 stainless steel with a polished finish (60 mm / 2.36 in main pipe)
- Two mufflers and one resonator
- Two 4-inch rolled tips
- Gaskets, bolts, and nuts
Not included: catalytic converters. As a cat-back system, this kit is designed to mount behind your factory catalytic converters, which remain on the vehicle.
Check Before Ordering
- Engine and body: This kit is listed for the 2003-2006 Hyundai Tiburon GT and SE with the 2.7L V6 engine and the two-door coupe body only. The 2.0L 4-cylinder Tiburon is not covered.
- System type: It is a cat-back system — it replaces the exhaust from the factory catalytic converters rearward. Your catalytic converters are not part of this kit and stay in place.
- Exit layout: The system finishes in a dual rear exit with two 4-inch tips, one on each side.
- Installation: Bolt-on with no cutting; the gaskets, bolts, and nuts are included. Professional installation is recommended so the tips can be aligned correctly during fit-up.
Shipping & Returns
Free U.S. Shipping: Orders are typically processed within 1–2 business days and delivered within 7–9 business days. Additional charges may apply to remote areas.
30-Day Returns: Unopened and unused items in their original packaging may be returned within 30 days of receipt. Return shipping is covered for verified quality issues.
Worry-Free Delivery: Optional protection against eligible loss, theft, delay, or transit damage is available at checkout.
Fitment & Compatibility
- Fits factory-equipped vehicles with listed configurations.
- ✅Please confirm vehicle specifications before ordering.
| YEAR | MAKE | MODEL | ENGINE | BODY |
|---|---|---|---|---|
| 2003-2006 | Hyundai | Tiburon GT | 2.7L V6 | Coupe — 2 Door |
| 2003-2006 | Hyundai | Tiburon SE | 2.7L V6 | Coupe — 2 Door |
2003-2006 Hyundai Tiburon GT/SE 2.7L V6 Cat-Back Exhaust FAQs
Q1: Will this cat-back system fit a 2004 Hyundai Tiburon GT?
A1: Yes, if your 2004 Tiburon GT is the 2.7L V6 with the two-door coupe body. This system is listed for the 2003-2006 Hyundai Tiburon GT and SE powered by the 2.7L V6. The 2.0L 4-cylinder Tiburon is not covered by this kit.
Q2: Is it compatible with a 2006 Hyundai Tiburon V6?
A2: Yes. The 2006 Hyundai Tiburon with the 2.7L V6 and the two-door body falls inside the covered 2003-2006 GT/SE range. Before ordering, confirm your car has the 2.7L V6 rather than the 2.0L four-cylinder.
Q3: How much horsepower does this exhaust add?
A3: Flashark does not publish dyno or horsepower data for this system, so we do not make a specific power claim. If a power figure is a deciding factor for you, contact our support team before ordering to check whether any test data is available for this SKU.
Q4: What kind of sound can I expect from this exhaust?
A4: We do not publish decibel or sound-recording data for this system, and exhaust tone is subjective, so we do not make claims such as “no drone.” The kit uses two mufflers and one resonator in a dual-exit layout. If sound is a deciding factor, ask our support team whether a sound clip or test data exists for this exact kit before you order.
Q5: Does installation require cutting or welding?
A5: No cutting is required — the product specification lists this kit as bolt-on. The gaskets, bolts, and nuts needed to mount it are included. Professional installation is recommended so the dual tips can be positioned correctly during fit-up.
Q6: Is the stainless steel rust-proof?
A6: The system is made from 201 stainless steel with a polished finish. We do not describe any exhaust as “rust-proof,” because surface condition over time depends on the driving environment and maintenance. Stainless steel is not the same as coated mild steel, but treat the finish as a normal wear surface.
Q7: Will this fit the 2.0L 4-cylinder Hyundai Tiburon?
A7: No. This kit is listed only for the 2.7L V6 GT/SE (2003-2006, two-door). It is not offered for the 2.0L 4-cylinder Tiburon. If you drive a 2.0L car and need help identifying the correct product, contact our support team with your vehicle information.
Q8: How does the price compare with OEM or other exhaust options?
A8: We cannot compare prices against every OEM or aftermarket option. What this kit includes is a complete cat-back system: full piping in 201 stainless steel, two mufflers, one resonator, two 4-inch rolled tips, and mounting hardware. When you compare systems, check that each quote covers the same scope — material, muffler configuration, tips, and included hardware — so you are comparing like for like.
Q9: What do the 4-inch rolled tips look like?
A9: The system ends in two rolled tips measuring 4 in (101.6 mm) with a polished finish, arranged as a dual rear exit with one tip on each side.
Q10: What is included in this kit?
A10: The kit includes the complete cat-back piping for the 2.7L V6 Tiburon (60 mm / 2.36 in main pipe in 201 stainless steel), two mufflers, one resonator, two 4-inch rolled tips, and the gaskets, bolts, and nuts for installation. Catalytic converters are not included, because a cat-back system mounts behind your factory converters.
Q11: Will this system delete my catalytic converters?
A11: No. As a cat-back system, it is designed to mount behind your factory catalytic converters, which stay on the vehicle. Nothing in this kit replaces or removes catalytic converters.
Q12: Why should I choose this Flashark kit over other Tiburon exhaust options?
A12: On the facts we can verify: it is a full cat-back system in 201 stainless steel with a polished finish, a two-muffler / one-resonator layout, dual 4-inch rolled tips, bolt-on installation with no cutting, and the mounting hardware included. It also ships free within the U.S. and is covered by a 30-day return policy. For anything else — sound clips, dyno data, or fitment on a specific car — ask our support team before ordering.