Main menu

Filters

Oil Catch Can

In stock
Out of stock

Oil Catch Can

22 products

Showing 1 - 22 of 22 products

Flashark oil catch can is designed to capture excess oil and contaminants that escape past the engine's piston seals and enter the crankcase. While oil is essential for lubrication, some inevitably result in blow-by. The catch can prevent this blow-by from re-entering the engine's air intake, protecting engine performance.

What is the purpose of the baffled oil catch can? Custom grooves in the catch can's inlet increase air turbulence ensuring all the oil sinks to the bottom of the can, leaving nothing but clean air to pass through the 50-micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions.

Are oil catch cans bad for your car? Oil catch cans are simple devices that greatly benefit direct injection engines. The oil catch cans prevent oil and other contaminants from causing a buildup of debris inside the engine's intake manifold

Showing 1 - 22 of 22 products

Main menu

Filters

In stock
Out of stock

Let customers speak for us

from 1605 reviews

2001-2005 Honda Civic DX/LX EX 1.7L Short/Long Tube Headers 4CYL

Zargham A.

Great

The headers work Great, really loud and good sound. Definitely a performance boost it made my 0-60 mph come down by around 0.4 seconds. And you can feel it too. But the 02 sensor place is on the other side which most people get an extension for. But you can also extend it there and connect it too but be careful make sure the cables don’t the header.

2001-2005 Honda Civic DX/LX EX 1.7L Short/Long Tube Headers 4CYL

05/23/2025

2002-2006 Nissan Sentra SE-R Spec V 2.5L B15 QR25DE I4 Catback Exhaust w/ 4 Inches Muffler Tip

Blake R.

New exhaust

Looks great and sound good

2002-2006 Nissan Sentra SE-R Spec V 2.5L B15 QR25DE I4 Catback Exhaust w/ 4 Inches Muffler Tip

05/22/2025

2006-2013 BMW N52 N51 | E90 E91 E92 E93 E82 | 128i 325i 328i 330i Exhaust Header

Anthony L.

Great Value

Fit perfectly for my 328xi 👍. Sounds great as well.

2006-2013 BMW N52 N51 | E90 E91 E92 E93 E82 | 128i 325i 328i 330i Exhaust Header

05/22/2025

Exhaust Header for 1988-1997 Chevy/GMC C/K 1500/2500 Pickup 305 5.0L/350 5.7L

Jerry S.

Chrome shorty headers

Purchased the chrome shorty headers for a 1988 GMC C1500 with 5.7 engine. Quality and fit were very good, all parts that were in the box to install. Installation was went very good with spark plugs out, but found when trying to install plugs on passenger side rear plug (# 8 cylinder ) could not be installed. Plug was to long. ( I think someone makes a shorter plug that could be installed ) So I removed header and installed #8 plug and reinstalled header. Spark plug wire barely fit but had to work for the time, put piece of heat shield between header and wire. Had y pipe made and connected to original exhaust. Header look and make the truck sound very good

Exhaust Header for 1988-1997 Chevy/GMC C/K 1500/2500 Pickup 305 5.0L/350 5.7L

05/22/2025

2002-2007 Subaru WRX/STI GD EJ205 Catback Exhaust 3" Pipe 4.5" Muffler Tip + Downpipe Up-pipe

Adam F.

Quality fitment and sound

I received my exhaust for my 05 forester xt. Technically not made for it but with some muffler hanger extensions, it came out exactly like I wanted. The sound is jtgat perfect Subaru rumble. Very happy and would order again.

2002-2007 Subaru WRX/STI GD EJ205 Catback Exhaust 3" Pipe 4.5" Muffler Tip + Downpipe Up-pipe

05/21/2025

Exhaust Header for 1988-1997 Chevy GMC 305 350 Small Block SBC 5.0L 5.7L V8 C/K1500 C/K2500 C/K3500

Joshua Q.

They look better than expected

Flanges are thick, nice welds on primaries to flange. They fit my vehicle. Most importantly they are real. The price was low enough I thought it might be a scam but they showed up in a few days. Only thing I would like better is if they came with Allen head bolts so that you can get to the bolt easier behind the cjrved primaries.

Exhaust Header for 1988-1997 Chevy GMC 305 350 Small Block SBC 5.0L 5.7L V8 C/K1500 C/K2500 C/K3500

05/19/2025

1992-2000 Honda Civic 1.6L Catback Exhaust System with 4-Inch Burnt Rolled Muffler Tip 2.25 Inch

Samuel D.L.H.

Pretty good for the price

It got here alot sooner than expected. Like waaaay sooner. I tried putting it on myself on my 1998 honda civic lx but instead decided on having an expert do that for me. It was a good thing too because they ended up telling me and showing me that one of the pipes nearest to the catalytic converter was actually too short. So he ended up cutting off a part of the original pipe and welding it on the catback. After that the installation went pretty smoothly. It's loud but not too loud, it has a nice throat like sound and thankfully it doesn't sound like a fart. It looks great with that nice blue finish on the muffler and it adds a little bit of horsepower. Nothing too crazy though but if you know your car you'll definitely feel the difference. Overall, I would definitely buy from here again, seems pretty legit.

1992-2000 Honda Civic 1.6L Catback Exhaust System with 4-Inch Burnt Rolled Muffler Tip 2.25 Inch

05/19/2025

Exhaust Header for 1977-1979 Ford Bronco F100 F150 F250 F350 4WD 351M/400M 5.8L 6.6L P/U

Jeremiah H.

Very good product

Very happy well thought out product had to make exhaust go under cross member but as far as the headers themselves works great and fit perfect.

Exhaust Header for 1977-1979 Ford Bronco F100 F150 F250 F350 4WD 351M/400M 5.8L 6.6L P/U

05/08/2025

Exhaust Header for 1997-2005 Subaru Impreza RS/TS/Outback Legacy GT 2.5L Racing NON-turbo

Matt W.

JDM EJ203 swap for 05 Outback 2.5i

These puppies were such an easy add on power boost for an anemic EJ20. I absolutely love the sound as well!

Exhaust Header for 1997-2005 Subaru Impreza RS/TS/Outback Legacy GT 2.5L Racing NON-turbo

05/06/2025

2004-2010 Ford F150 5.4L Triton V8 Exhaust Header

Michael D.

2006 ford headers

Welds are very good and fits my 2006 ford expedition 5.4. Bolted right up. It says they will only fit F150, but they fit my expedition perfectly.

2004-2010 Ford F150 5.4L Triton V8 Exhaust Header

05/06/2025

Exhaust Header for 1996-2001 Chevrolet Chevy S10 Blazer GMC Sonoma Jimmy 4.3L V6 4WD

john d.

4.3 chevy headers

I used them on my railbuggy 4.3 chevy nice thick quality, fit to engine fine. Happy with pur hase!!

Exhaust Header for 1996-2001 Chevrolet Chevy S10 Blazer GMC Sonoma Jimmy 4.3L V6 4WD

05/02/2025

Exhaust Header for 1993-1997 Toyota Corolla 1.8L 7A-FE 4-2-1 Racing

Reynaldo V.

1994 toyota celica engine 7AFE

Was in search of a exhaust for the longest for a 1994 toyota celica. Did research and found out that the corolla has has same engine as the 1994 toyota celica fwd I ended up risking it and ordered it upon arrival everything was in package and began assembling and compared it there was a small slight problem where the headers wouldn't slide into the studs on exhaust the pattern was right just hole size diffrence. Again this manifold is made for the corrola not celica but ended up drilling out the stud holes a tad bit bigger and it slid on so now have complete header goes under engine with clearance and out the back then chopped up the end and did my own system the back. For a header that's not meant to go on a corrola 10/10 recommend everything held well no Cracks or anything sounds great sensors go right in its awsome.

Exhaust Header for 1993-1997 Toyota Corolla 1.8L 7A-FE 4-2-1 Racing

04/28/2025

For 2000-2006 BMW M54 Engine | E46 320i/325i/330i Z3 Z4 Exhaust Header

Abdul K.

E46 ZHP

I’m pretty impressed overall. The packaging was top-notch. Everything arrived perfectly sealed, and there was no damage during shipping.

As far as the fitment goes, the headers were nearly perfect. However, I did run into a couple of small issues. First, I had to slightly modify the engine mount bracket to ensure a proper fit. It wasn’t a big deal, just a bit of adjustment needed. The other issue I encountered was with the O2 bung placement. I had to modify the firewall slightly to accommodate it, but again, it was a pretty straightforward fix and is required with mostly all aftermarket header replacements on these e46’s.

One thing I would recommend is to stick with OEM header gaskets instead of using the ones provided in the kit. The OEM gaskets seem to offer a better seal and fit, and heat protection for the upper plastic valve cover.

All in all, I’m very pleased with the headers. They’re a great upgrade for the E46, and despite the minor adjustments, the process was pretty painless.

For 2000-2006 BMW M54 Engine | E46 320i/325i/330i Z3 Z4 Exhaust Header

04/26/2025

Downpipe Exhaust for 2007-2016 Mini Cooper R55-R61 1.6 Turbo 2.5 inch with 2 O2 sensor bungs

Ivan C.

Nice downpipe!

The delivery was fast, welding spots are carefully finished, overall quality is great.
I have 2016 r60 s and no drone sound on high or low revs when going highway.
I like it so far, let’s see how it’s going to be after tune.

Downpipe Exhaust for 2007-2016 Mini Cooper R55-R61 1.6 Turbo 2.5 inch with 2 O2 sensor bungs

04/24/2025

Downpipe Exhaust for 2012-2015 VW Golf GTI MK7 2.0T 3 Inches Pipe Bolt on

Jon J.

Pretty good

Install was pretty painless. Had to adjust exhaust hangers but otherwise great. Used some exhaust sealant between pipes no leaks. Sounds great too

Downpipe Exhaust for 2012-2015 VW Golf GTI MK7 2.0T 3 Inches Pipe Bolt on

04/20/2025

go place to get parts

good place

they are fast on there shipping good part for the money i will buy more from them thank you

Great product and company

Company went above and beyond to make sure my exhaust fit the way it should. One of the best experiences I’ve had working with a company

Upper Control Arms

I received my upper control arms yesterday and couldn’t be more impressed with them. I only bought them because of the great price and wasn’t expecting much, but when I opened them up and saw the size, quality and construction of them it blew me away. Super high quality and strength. Amazing product and would highly recommend them to everyone looking to upgrade their upper control arms.

Hi, thanks for the review and pictures, looking forward to your next purchase!

Best car parts company to date…

I’d like to start off with how fast the shipping is, within a few days my new headers and down pipe arrived. After bolting everything down sadly I missed the nut that goes over an empty valve hole, and it fell off driving. I reached out to flashark and only asked for a replacement nut, not only did they respond within the hour I had sent the email, not only did they replace the nut, I got the whole new set of headers and downpipe. Amazing service, amazing products as well (I love the headers). Definitely buying again from here.

Hi, thanks for the review and pictures! This is what we should do. We apologize for the inconvenience. We'll continue to improve our service! Looking forward to your next purchase, we will give you a discount!

Search By Year,Make and Model

Oil Catch Can

Recently viewed

Let customers speak for us

Let customers speak for us