2010-2015 Chevrolet Camaro 3.6L V6 Cat-Back Exhaust with N1 Burnt Tips
A complete cat-back system gives your 2010-2015 Chevrolet Camaro 3.6L V6 a full exhaust upgrade behind the catalytic converters in one bolt-on kit. This FLASHARK system (SKU FLES08149) replaces the factory cat-back section with 2.36 in OD piping, two mufflers, two resonators, and a pair of 3.5 in burnt-finish tips in a dual rear-exit layout, finished in polished 201 stainless steel. Installation is bolt-on with no cutting required, and the mounting hardware is included in the box.
Specifications
| Specification | Detail (SKU FLES08149) |
|---|---|
| Product Type | Cat-back exhaust system |
| System Configuration | Dual-exit cat-back |
| Main Pipe Diameter | 2.36 in OD |
| Muffler Configuration | 2 mufflers |
| Resonator | 2 resonators |
| Tip Quantity | 2 |
| Tip Size | 3.5 in diameter |
| Tip Finish | Burnt (heat-treated) |
| Exit Position | Dual rear exit |
| Material | 201 stainless steel |
| Surface Finish | Polished |
| Installation | Bolt-on; no cutting |
| Hardware Included | Gaskets, bolts, nuts and clamps |
| Brand | FLASHARK |
Key Features
- Complete Cat-Back Replacement: The system replaces the factory exhaust from behind the catalytic converters all the way to the tips, so you get new piping, mufflers, resonators, and tips in a single kit instead of piecing the system together.
- Dual Rear-Exit Layout with Two 3.5 in Tips: Both rear tips exit at the rear of the car in a dual-outlet configuration, giving the back of your Camaro a symmetrical performance look and a clear visual upgrade over a single-exit setup.
- Two Mufflers and Two Resonators: The full-length system carries its own pair of mufflers and resonators rather than relying on delete pipes, so the sound-control components of the cat-back section are all included and matched to the 2.36 in OD piping.
- 201 Stainless Steel with Polished Finish: The piping, mufflers, and tips are built from 201 stainless steel with a polished surface, which resists rust better than painted or aluminized mild steel and keeps the visible sections looking clean under the car.
- Bolt-On Installation with No Cutting: The kit mounts with fasteners instead of fabrication—no cutting is required—and the needed gaskets, bolts, nuts, and clamps ship in the box, so you are not sourcing installation hardware separately.
- Heat-Treated Burnt Tip Finish: The blue burnt finish on the tips is applied with a heat-treatment process. Keep it looking right by cleaning with water and, if needed, a very gentle soap—never scrub or use rubbing or cleaning compounds, which can damage the color.
What's Included
- Cat-back exhaust system for 2010-2015 Chevrolet Camaro 3.6L V6 2-door (SKU FLES08149): 2.36 in OD piping, two mufflers, two resonators, and two 3.5 in burnt-finish rear tips
- Installation hardware: gaskets, bolts, nuts, and clamps
The factory catalytic converters and the exhaust sections ahead of them are not part of this kit—the system starts behind the converters and runs to the tips.
Check Before Ordering
- Confirm your Camaro is a 2010-2015 3.6L V6 2-door. This system does not fit V8 models such as the SS.
- Check that the configuration matches what you want: 2.36 in OD main piping with a dual rear exit and two 3.5 in burnt tips.
- Plan for a bolt-on installation with no cutting. If you do not have the appropriate tools and a safe way to lift the car, have the system installed by a professional.
- Note the tip care requirements: the burnt finish is heat-treated and must be cleaned with water and gentle soap only—abrasives and chemical cleaners can damage the color.
- If anything about your vehicle or setup is unusual, use the Check Fitment tool on this page or contact FLASHARK support before ordering.
Shipping & Returns
Free U.S. Shipping: Orders are typically processed within 1–2 business days and delivered within 7–9 business days. Additional charges may apply to remote areas.
30-Day Returns: Unopened and unused items in their original packaging may be returned within 30 days of receipt. Return shipping is covered for verified quality issues.
Worry-Free Delivery: Optional protection against eligible loss, theft, delay, or transit damage is available at checkout.
Fitment & Compatibility
⚠️ CRITICAL FITMENT RULE (MUST READ BEFORE PURCHASE)
✅ Verified Fitment
| Brand | Model | Year Range | Full Compatible Specs |
|---|---|---|---|
| Chevrolet | Camaro | 2010-2015 | 2-Door body style only; 3.6L V6 |
2010-2015 Chevrolet Camaro 3.6L V6 Cat-Back Exhaust FAQs
Q1: Will this system fit my exact year? I have a 2011 Camaro V6.
A1: Yes. This system fits 2010-2015 Chevrolet Camaro models with the 3.6L V6 engine and 2-door body style, so a 2011 V6 2-door is covered. Confirm the engine and body style before ordering, because the same years were also sold with V8 engines that this system does not fit.
Q2: I have a V8 model. Will this fit the 2010 Camaro SS?
A2: No. This system is engineered for the 3.6L V6 engine only, and the SS uses a V8. Ordering the correct engine-specific system is the safest way to avoid fitment problems and returns, so contact FLASHARK support if you need help finding a V8 option.
Q3: Is this just a muffler replacement or a full exhaust kit?
A3: This is a complete cat-back system. It replaces the factory exhaust from behind the catalytic converters all the way to the tips, including the 2.36 in OD piping, two mufflers, two resonators, and the two burnt tips. The catalytic converters and the sections ahead of them stay in place.
Q4: What is the main pipe diameter of this cat-back?
A4: The main piping is 2.36 in OD (outside diameter). This diameter is consistent along the cat-back section and is matched to the included mufflers, resonators, and tips, so the system installs as one coherent kit.
Q5: How many exhaust tips does it have, and what size are they?
A5: There are two tips, each 3.5 in in diameter, exiting at the rear of the car on a dual-exit layout. The tips carry the burnt (heat-treated) finish, which is part of the N1-style look of the system.
Q6: What material is the system made from?
A6: The system is built from 201 stainless steel with a polished surface finish and burnt-finish tips. 201 stainless steel is a chromium-nickel-manganese stainless alloy commonly used in performance exhaust systems for corrosion resistance.
Q7: Do I need to cut or weld anything during installation?
A7: No cutting is required. The system is a bolt-on replacement for the factory cat-back section, and the gaskets, bolts, nuts, and clamps needed for installation are included in the box.
Q8: Is all the necessary hardware included?
A8: Yes. Gaskets, bolts, nuts, and clamps ship with the kit. You supply the hand tools and lifting equipment needed to access the underside of the car; if you do not have a safe way to lift the vehicle, have a professional handle the installation.
Q9: Do I need an ECU tune after installing this exhaust?
A9: This system replaces only the cat-back section behind the factory catalytic converters and installs with the included hardware. If your engine is already modified or you are unsure about your setup, contact FLASHARK support before ordering so they can confirm compatibility.
Q10: How does it sound? Will there be highway drone?
A10: Sound is subjective and varies with the car, so we do not quote sound levels or make drone guarantees for this SKU. What we can confirm is the hardware: the system includes two mufflers and two resonators along the cat-back section. If sound character is the deciding factor for you, review the product photos, customer reviews on this page, and available sound clips before ordering.
Q11: How do I care for the blue burnt tips?
A11: The burnt finish is applied with a heat-treatment process and can be damaged by aggressive cleaning. Use water and, if necessary, a very gentle soap. Never scrub or use rubbing or cleaning compounds on the tips, as this will damage the color.
Q12: How can I confirm this exhaust fits my Camaro before ordering?
A12: Check three things: the model year (2010-2015), the engine (3.6L V6, not a V8), and the body style (2-door). You can also use the Check Fitment tool at the top of this page to search by year, make, and model. If anything is unclear, contact FLASHARK support with your VIN or vehicle details before placing the order.
Q13: How fast will I receive my order, and what if I need to return it?
A13: Orders are typically processed within 1-2 business days and delivered within 7-9 business days, with free U.S. shipping. Unopened and unused items in their original packaging can be returned within 30 days of receipt, and return shipping is covered for verified quality issues.