Product Specifications
3" Catless Turbo Downpipe for 1999–2004 Audi & Volkswagen 1.8L L4
The Flashark FLES08310 is a two-piece stainless-steel catless turbo downpipe for confirmed 1999–2004 Audi and Volkswagen 1.8L L4 applications. It connects from the turbo-side outlet toward the exhaust system and replaces the factory downpipe/catalytic-converter section on compatible vehicles.
Configuration at a Glance
- SKU: FLES08310
- Application: Confirmed 1999–2004 Audi and Volkswagen 1.8L L4 applications
- Configuration: Two-piece catless turbo downpipe
- Material: 16-gauge stainless steel
- Finish: Mirror-polished stainless steel
- Turbo-side inlet: 3 inches
- Exhaust-side outlet: 2 inches
- Sensor provision: One welded oxygen-sensor bung
- Construction: Mandrel-bent tubing, TIG-welded joints, flex section and machined turbo-side flange
Built for Confirmed 1.8L L4 Applications
This assembly uses a two-piece layout with an upper turbo-side section and a lower exhaust-side section. The upper section includes a braided flex joint, while the turbo-side flange, outlet connection and oxygen-sensor location should be compared with your existing exhaust before installation.
What’s Included
- 1 × Upper downpipe section
- 1 × Lower downpipe section
- 2 × Exhaust gaskets
- 7 × Bolts
- 7 × Nuts
- 7 × Washers
Not included: Oxygen sensors. Reuse your original compatible sensors where applicable.
Please Check Before Ordering
- Use the Vehicle Fitment table below to confirm your exact year, make, model and 1.8L L4 engine.
- Compare the turbo-side flange, 3-inch inlet, 2-inch exhaust-side outlet and oxygen-sensor location with your existing system.
- This product is catless and does not include a catalytic converter.
- Modified turbochargers, exhaust systems or sensor configurations may require different components.
- Volkswagen Golf is not included in the confirmed fitment data for this SKU.
Important Compliance Notice
This catless downpipe removes or alters the original catalytic-converter section. It is intended only for off-road, racing or competition use where permitted. It may trigger a check-engine light and may affect emissions readiness. Not for use on public roads where emissions-control equipment is required. Please verify applicable local, state and federal regulations before purchase.
Shipping & Returns
Free U.S. Shipping: Orders are typically processed within 1–2 business days and delivered within 7–9 business days. Additional charges may apply to remote areas.
30-Day Returns: Unopened and unused items in their original packaging may be returned within 30 days of receipt. Return shipping is covered for verified quality issues.
Worry-Free Delivery: Optional protection against eligible loss, theft, delay, or transit damage is available at checkout.
Fitment & Compatibility
Confirmed for the following 1.8L L4 applications only. Please verify the factory turbo-side flange, exhaust connection and sensor location before ordering. Not confirmed for: Volkswagen Golf, diesel/TDI applications, naturally aspirated engines, VR6 applications, or vehicles with modified turbo/exhaust connections unless separately verified.
Year
Make
Model
Engine
1999–2004
Audi
A3
1.8L L4
1999–2004
Audi
A4
1.8L L4
1999–2004
Audi
A4 Quattro
1.8L L4
2000–2004
Audi
S3
1.8L L4
1999–2004
Audi
TT
1.8L L4
2000–2004
Audi
TT Quattro
1.8L L4
1999–2004
Volkswagen
Beetle
1.8L L4
1999–2004
Volkswagen
Jetta
1.8L L4
Product FAQ
It is confirmed for listed 1999–2004 Audi A3, A4, A4 Quattro, TT, TT Quattro, S3, Volkswagen Beetle and Volkswagen Jetta applications equipped with the 1.8L L4 engine. Please review the Vehicle Fitment table before ordering. No. Volkswagen Golf is not included in the current confirmed fitment data for FLES08310. Do not order this SKU for a Golf unless Flashark provides separate confirmation for your exact vehicle configuration. This is a catless downpipe. It does not include a catalytic converter and replaces or alters the factory catalytic-converter section on a compatible vehicle. A check-engine light or emissions-readiness issue may occur after installing a catless downpipe. Results vary by vehicle configuration and calibration. A warning-free result is not guaranteed. The listed turbo-side inlet is 3 inches and the exhaust-side outlet is 2 inches. Please compare these connection points with your original system before purchase. Yes. The downpipe has one welded oxygen-sensor bung. Oxygen sensors are not included in the package. The package includes one upper downpipe section, one lower downpipe section, two exhaust gaskets, seven bolts, seven nuts and seven washers. Fitment cannot be guaranteed on modified vehicles. Compare the turbo-side flange, exhaust-side outlet, oxygen-sensor location and overall connection layout with your existing parts before ordering. This catless downpipe is intended only for off-road, racing or competition use where permitted. It may not be legal for public-road use where emissions-control equipment is required. Check applicable regulations before purchase.
Which vehicles does this FLES08310 downpipe fit?
Does this downpipe fit a Volkswagen Golf?
Is this a catted or catless downpipe?
Will this catless downpipe cause a check-engine light?
What are the inlet and outlet sizes?
Does the downpipe have an oxygen-sensor port?
What is included in the package?
Will it fit a modified turbocharger or aftermarket exhaust?
Can I use this downpipe on public roads?




















