Description
Fitment
FAQ
Shipping & Returns
Reviews
Flashark Cold Air Intake Kit For 1999-2006 Sierra, Silverado, Yukon, Tahoe, Suburban, Avalanche, Escalade 4.8/5.3/6.0L Vortec V8
The GM Vortec 4.8L, 5.3L, and 6.0L are among the most prolific truck and SUV engines ever built — powering everything from bare-bones work Silverados to loaded Cadillac Escalades over a decade-long production run. But the factory intake system is the same restrictive plastic airbox across the entire range: a sealed unit with a flat paper filter, corrugated rubber intake hose, and an intake tract that heats up fast under load.
This Flashark 4-inch cold air intake replaces the entire factory system with a polished aluminum intake tube, an oversized blue dry cotton filter, and a stamped-steel heat shield that separates the filter from engine-bay heat. The 4" (101 mm) tube delivers significantly more airflow than the stock ~3-inch rubber hose, and the smooth mandrel bends eliminate the turbulence pockets that the factory corrugations create at every bend.
The Vortec V8 platform benefits immediately. Throttle response sharpens across the low and mid RPM range — the range where daily driving, towing, and passing actually happen. The open-element filter lets the engine breathe, producing an aggressive intake sound that the factory-muffling airbox completely suppresses. The dry cotton filter flows more CFM than stock paper and never risks contaminating the MAF sensor — because there is no oil to over-apply.
The fitment is massive for a reason: the 1999–2007 Classic GMT800 platform (and its GMT900 derivatives) shares the same basic intake architecture across Silverado, Sierra, Avalanche, Tahoe, Yukon, Suburban, and Escalade. Whether your truck is a 1999 base-model Silverado 1500 with the 4.8L or a 2006 Escalade with the 6.0L LQ9, the factory airbox layout is the same — and so is the install.
No cutting, no drilling, no tune required. The heat shield bolts to factory mounting points. The factory MAF sensor transfers directly. Average install time: 45–60 minutes with basic hand tools.
Key Features
101 mm (4") Polished Aluminum Intake Tube — Lightweight mandrel-bent aluminum tubing with polished finish replaces the factory corrugated rubber hose. 4-inch diameter delivers approximately 78% more cross-sectional flow area than the stock ~3-inch hose. Smooth internal bore maintains airflow velocity from the filter outlet to the throttle body
Oversized Blue Dry Cotton Filter — High-flow conical filter element with significantly greater surface area than the stock flat paper panel. Dry cotton gauze media — no oil required, no MAF sensor contamination risk. Washable and reusable for the life of the vehicle. Clean every 10,000–15,000 miles
4" Stamped Steel Heat Shield — Steel heat shield isolates the filter element from underhood radiant heat. On the Vortec platform, the exhaust manifolds sit close to the airbox location — the heat shield preserves intake charge temperature and maintains air density
Bolt-On Installation — No Tune Required — Uses factory airbox mounting points. Reuses the stock MAF sensor with no spacer or adapter needed. No ECM reprogramming, no check engine light, no cutting. Compatible with stock and tuned configurations
Covers 4.8L, 5.3L, and 6.0L Vortec V8 Engines — Single part number fits the entire Vortec V8 family. The 4.8L (LR4), 5.3L (LM7/L59/LM4), and 6.0L (LQ4/LQ9) all share the same throttle body flange diameter and intake routing on the GMT800 platform
7–10% Horsepower & 6–8% Torque Gain — Increased airflow supports better combustion efficiency across all three displacements. On a stock 5.3L (295 HP / 330 lb-ft), expect approximately 21–30 HP and 20–26 lb-ft of additional output
Aggressive Intake Sound — The open-element filter and smooth aluminum tube eliminate the factory airbox sound attenuation. You will hear a deep, throaty induction note under acceleration — especially noticeable at wide-open throttle
Massive Platform Coverage — Fits 1999–2007 Classic Silverado, Sierra, Avalanche, Tahoe, Yukon, Suburban, and Escalade across three engine displacements. One kit, one part number, dozens of applications
1-Year Flashark Warranty — Covered against material defects and manufacturing failures.
Details and Specifications:
- Brand: FLASHARK
- SKU: FLIS08104
- Color: Blue
- Type: Cold Air Intake Kit
Performance: 4'' Performance Cold Heat Shield
Sharing from noahbalboa69
Stock Intake vs Flashark Intake
Upgrade your engine with the Flashark 4" Cold Air Intake and feel the difference immediately. Compared to the stock intake, here’s what you can expect:
- Airflow: The stock intake restricts airflow, limiting engine potential. Flashark’s design allows maximum airflow, feeding your Vortec engine more cold, oxygen-rich air.
- Throttle Response: Stock systems often feel sluggish, especially at low and mid RPM. Flashark improves throttle response, giving you quicker, smoother acceleration.
- Sound: Stock intake is quiet but uninspiring. The Flashark intake produces a deeper, more aggressive intake sound that enhances the driving experience.
- Maintenance & Cost: Stock filters are disposable and need frequent replacement. Flashark’s high-quality cone filter is washable and reusable, saving you money over time.
Experience more power, torque, and excitement with every drive—your GM truck or SUV will feel transformed.
Washable, Reusable Filter
The Flashark cold air intake isn’t just about performance—it’s designed for long-term convenience and savings.
- Washable Filter: The high-quality cone air filter can be cleaned and reused, reducing the need for frequent replacements.
- Cost-Effective: Save money on disposable filters while maintaining peak engine performance.
- Long-Lasting Performance: Designed to last the life of your vehicle with proper care.
- Maintenance Interval: Simply clean your filter every 10,000–15,000 miles to keep airflow and performance at their best.
With easy maintenance and reusable components, the Flashark intake helps keep your engine performing at its peak while reducing ongoing costs.
Confirmed compatible — 1999–2006 Chevy / GMC / Cadillac Vortec V8 (4.8L / 5.3L / 6.0L) (all trims, 2WD & 4WD):
| Year | Make | Model | Engine |
|---|---|---|---|
| 1999–2006 | Chevrolet | Silverado 1500 | 4.8L V8 / 5.3L V8 / 6.0L V8 |
| 2001–2006 | Chevrolet | Silverado 1500 HD | 6.0L V8 |
| 1999–2006 | Chevrolet | Silverado 2500 | 5.3L V8 / 6.0L V8 |
| 2001–2006 | Chevrolet | Silverado 2500 HD | 6.0L V8 |
| 2001–2006 | Chevrolet | Silverado 3500 | 6.0L V8 |
| 2000–2006 | Chevrolet | Suburban 1500 | 5.3L V8 / 6.0L V8 |
| 2000–2006 | Chevrolet | Suburban 2500 | 6.0L V8 |
| 2000–2006 | Chevrolet | Tahoe | 4.8L V8 / 5.3L V8 |
| 2002–2006 | Chevrolet | Avalanche 1500 | 5.3L V8 |
| 2003–2006 | Chevrolet | SSR | 5.3L V8 / 6.0L V8 |
| 2006 | Chevrolet | Trailblazer | 5.3L V8 / 6.0L V8 |
| 2003–2006 | Chevrolet | Trailblazer EXT | 5.3L V8 |
| 2003–2006 | Chevrolet | Cheyenne | 5.3L V8 |
| 2003–2006 | Chevrolet | Sonora | 5.3L V8 |
| 1999–2006 | GMC | Sierra 1500 | 4.8L V8 / 5.3L V8 / 6.0L V8 |
| 2001–2006 | GMC | Sierra 1500 HD | 6.0L V8 |
| 1999–2006 | GMC | Sierra 2500 | 5.3L V8 / 6.0L V8 |
| 2001–2006 | GMC | Sierra 2500 HD | 6.0L V8 |
| 2001–2006 | GMC | Sierra 3500 | 6.0L V8 |
| 2000–2006 | GMC | Yukon | 4.8L V8 / 5.3L V8 / 6.0L V8 |
| 2000–2006 | GMC | Yukon XL 1500 | 5.3L V8 / 6.0L V8 |
| 2000–2006 | GMC | Yukon XL 2500 | 6.0L V8 |
| 2003–2006 | GMC | Envoy | 5.3L V8 |
| 2003–2006 | GMC | Envoy XL | 5.3L V8 |
| 2004–2005 | GMC | Envoy XUV | 5.3L V8 |
1999–2006 Chevy/GMC 4.8L, 5.3L & 6.0L Vortec Cold Air Intake FAQ
Q1: What vehicles does this Flashark cold air intake kit fit?
A1: This cold air intake kit is designed for many 1999–2006 Chevy, GMC, and Cadillac trucks and SUVs equipped with a compatible 4.8L, 5.3L, or 6.0L Vortec V8. Common applications include the Chevy Silverado, Tahoe, Suburban, Avalanche, SSR, and Trailblazer, as well as the GMC Sierra, Yukon, Yukon XL, Envoy, and selected Cadillac Escalade models. Always confirm the year, model, and engine before ordering.
Q2: Does this cold air intake fit the 4.8L, 5.3L, and 6.0L Vortec engines?
A2: Yes. The kit is designed for compatible 4.8L LR4, 5.3L LM7, L59, and LM4, and 6.0L LQ4 and LQ9 Vortec V8 applications. This makes it suitable for customers searching for a cold air intake for a 4.8 Vortec, 5.3 Vortec, or 6.0 Vortec without purchasing separate kits for each engine size.
Q3: Will this intake fit a 1999–2006 Chevy Silverado or GMC Sierra?
A3: Yes. It fits many 1999–2006 Chevy Silverado and GMC Sierra 1500, 1500 HD, 2500, 2500 HD, and 3500 applications with a listed 4.8L, 5.3L, or 6.0L V8. Engine availability varies by model and year, so use the vehicle selector or verify the original engine before purchase.
Q4: Will this cold air intake fit a 2007 Chevy or GMC truck?
A4: The primary confirmed fitment is for 1999–2006 vehicles. Some 2007 Classic GMT800 trucks may use a similar intake layout, but the redesigned 2007 new-body GMT900 models use a different configuration. Confirm that your vehicle is a 2007 Classic and verify compatibility before ordering.
Q5: Does the Flashark cold air intake work with both 2WD and 4WD vehicles?
A5: Yes. The intake is compatible with both 2WD and 4WD versions of the listed Chevy, GMC, and Cadillac applications because the drivetrain layout does not normally change the factory airbox and throttle-body routing. Engine size, model year, and body generation still need to match the listed fitment.
Q6: How much horsepower does a cold air intake add to a 5.3L Vortec?
A6: Flashark lists potential gains of approximately 7–10% horsepower and 6–8% torque under favorable conditions, but actual results vary with engine condition, exhaust flow, tuning, ambient temperature, and testing method. On an otherwise stock 5.3L Vortec, the most noticeable improvements are often quicker throttle response, smoother airflow, and a stronger induction sound rather than a guaranteed peak horsepower number.
Q7: Will the results be different on a 4.8L or 6.0L Vortec?
A7: The basic benefits are similar across the 4.8L, 5.3L, and 6.0L Vortec engines, but the final power increase will depend on displacement and supporting modifications. A stock 4.8L may experience improved response and sound, while a modified 6.0L with headers, exhaust, or tuning may make better use of the additional airflow.
Q8: Does this 5.3 Vortec cold air intake require a tune?
A8: No tune is required for normal installation on a compatible stock vehicle. The kit reuses the factory mass airflow sensor, and the factory ECU can normally compensate for the airflow change. A custom tune is optional and may help maximize results when the intake is combined with headers, a freer-flowing exhaust, a camshaft, or other performance upgrades.
Q9: Will installing the intake cause a check engine light?
A9: A properly installed intake should not normally trigger a check engine light. Common causes of a light after installation include a disconnected MAF sensor, an incorrectly positioned MAF sensor, a loose coupler, an unplugged PCV hose, or an air leak after the MAF. Check every connection before starting the engine and scan any stored diagnostic code before replacing parts.
Q10: Does the kit reuse the factory MAF sensor?
A10: Yes. The original mass airflow sensor transfers to the new intake assembly. Handle the sensor carefully, install it in the correct airflow direction, and keep the sensing element clean. The included dry filter does not require filter oil, which helps reduce the risk of oil residue reaching the MAF sensor.
Q11: How does the Flashark intake compare with the stock Silverado air intake?
A11: The Flashark system replaces the factory corrugated intake hose and enclosed paper-filter airbox with a smooth 4-inch aluminum intake tube, a larger conical dry filter, and a steel heat shield. The design provides a more direct airflow path, a reusable filter, a cleaner engine-bay appearance, and a noticeably deeper intake sound during acceleration.
Q12: Will this intake make my Silverado, Sierra, Tahoe, or Yukon louder?
A12: Yes. The open-element filter and smooth aluminum tube allow more of the V8 induction sound to be heard. The truck remains relatively calm during light cruising, but the intake becomes deeper and more aggressive when the throttle is opened, especially during passing or wide-open acceleration.
Q13: Will a cold air intake improve gas mileage on a 5.3 Vortec?
A13: Fuel-economy improvements are not guaranteed. Reduced intake restriction may help efficiency in certain steady-speed driving conditions, but tire size, gearing, vehicle weight, engine condition, towing load, and driving style have a much larger effect. Many drivers also use more throttle after installation because they enjoy the stronger intake sound.
Q14: How long does the cold air intake installation take?
A14: Most installations can be completed in approximately 45–60 minutes with basic hand tools. The kit uses factory mounting locations and is designed to install without cutting or drilling. During installation, transfer the factory MAF sensor carefully and check that the intake tube, filter, heat shield, PCV connection, and clamps are secure.
Q15: Is the included air filter washable and reusable?
A15: Yes. The kit includes a washable and reusable dry cotton filter. Inspect and clean it approximately every 10,000–15,000 miles, or more frequently when driving on dusty roads or in off-road conditions. Allow the filter to dry completely before reinstalling it, and do not apply filter oil.
Q16: Does the heat shield prevent the intake from pulling in hot engine-bay air?
A16: The stamped-steel heat shield helps separate the filter from radiant heat produced by the engine and exhaust manifolds. For the best results, install the shield securely, maintain proper clearance around the intake tube, and make sure the filter is positioned near the factory fresh-air inlet area.
Q17: Can rain or water damage the engine with this cold air intake installed?
A17: The filter remains positioned high inside the engine bay, so normal rain and wet-road driving should not be a problem when the kit is installed correctly. Avoid driving through deep water or directing a pressure washer at the exposed filter. If the filter becomes heavily soaked, inspect and dry it before operating the vehicle.
Q18: Can I use this intake with long-tube headers or an aftermarket exhaust?
A18: Yes. The Flashark cold air intake can be used with compatible shorty headers, long-tube headers, cat-back exhaust systems, and other airflow upgrades. Combining intake and exhaust modifications can reduce restriction on both sides of the engine, while a professional tune may help optimize the complete setup.
Q19: Is this cold air intake suitable for towing and daily driving?
A19: Yes. The intake can be used on daily-driven, work, and towing vehicles when properly installed and maintained. Improved throttle response may be useful during merging, passing, or pulling a load, but the intake does not change the vehicle’s factory tow rating or replace required towing upgrades such as proper cooling, gearing, brakes, and transmission maintenance.
Fast Shipping Policy
Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy
Easy Return Policy
Every order comes with a 14-day free return, provided the item is brand new, uninstalled, and in its original packaging. We cover return shipping for quality issues. Refunds are processed within 3-5 business days. Click for Return Policy
Worry-Free Delivery Protection
Add Worry-Free Delivery at checkout — if it's lost, stolen, or damaged, you're 100% covered. Click for Worry-Free Delivery Protection