Product Details
Fitment
FAQ
Shipping & Returns
2008–2010 Dodge Challenger R/T & SRT-8 5.7L/6.1L HEMI V8 Cold Air Intake
Built for select HEMI V8 applications, this Flashark intake replaces the factory airbox and intake path with a polished aluminum-pipe kit and a red washable, reusable cone filter. It is designed for the 2010 Dodge Challenger R/T cold air intake searcher who has confirmed a 5.7L or 6.1L HEMI V8—not a V6 Challenger SE.
Specifications
| Brand | Flashark |
|---|---|
| Product type | Cold Air Intake Kit / Heat Shield Cold Air Intake |
| Pipe | Polished aluminum piping |
| Filter | Red, washable and reusable dual-layer pleated cotton cone filter with filter oil |
| Included intake configuration | 1 × Performance Cold Air Intake for the Cold Air Intake option |
Key Features
- HEMI-specific intake kit: The V8 fitment list helps keep a 2010 Dodge Challenger R/T cold air intake purchase focused on the 5.7L/6.1L HEMI applications this kit supports.
- Polished aluminum piping: The intake uses aluminum piping with a polished finish and a red filter for the listed configuration.
- Washable cotton filter: The reusable dual-layer pleated cotton cone filter is oiled to capture dirt and dust while supporting repeat service rather than routine filter replacement.
- Airflow-focused layout: The kit is intended to improve airflow through the stock manifold system and can sharpen throttle response through the low and mid RPM range.
- Expected output range: The listed performance range is approximately 5–10% horsepower and 6–8% torque; output varies with vehicle condition, calibration, installation, and supporting hardware.
- Distinct intake character: Expect a deeper, sportier intake tone under acceleration, with sound level depending on the vehicle and driving conditions.
Who This Kit Is For
This kit is for 2008–2010 Dodge Challenger R/T and SRT-8 owners running a 5.7L or 6.1L HEMI V8, as well as the Magnum, Charger, and Chrysler 300 V8 applications listed above.
- For you if you have confirmed the exact year, model, trim, and HEMI V8.
- For you if you prefer a washable, reusable oiled cotton filter.
- For you if you want a polished-pipe intake configuration with a deeper intake note under acceleration.
- Not for you if your Challenger is an SE or another V6 model.
- Not for you if you need California or CARB-state street-use approval for a kit without a verified EO number.
Check Before Ordering
- Vehicle: Confirm the exact year, model, trim, and 5.7L or 6.1L HEMI V8. A 2010 Dodge Challenger SE is not included in this fitment list.
- Variant: Choose the Cold Air Intake option for the listed intake kit. The Oil Catch Can + Cold Air Intake option has its own 2006–2010 Charger SRT-8 6.1L fitment.
- Filter service: The filter is oiled cotton. The listed service interval is approximately 100,000 miles; inspect it more often in dusty conditions.
- Performance expectations: Results vary with vehicle condition, calibration, installation, and supporting hardware; do not use horsepower figures as a guarantee.
- Legality: Check your local emissions requirements before ordering.
- Installation: Basic hand tools are listed for installation. Confirm all connections and clamps during installation.
What's in the Box
- ✓ 1 × Performance Cold Air Intake (Cold Air Intake option)
Shipping & Returns
Free U.S. Shipping: Orders are typically processed within 1–2 business days and delivered within 7–9 business days. Additional charges may apply to remote areas.
30-Day Returns: Unopened and unused items in their original packaging may be returned within 30 days of receipt. Return shipping is covered for verified quality issues.
Worry-Free Delivery: Optional protection against eligible loss, theft, delay, or transit damage is available at checkout.
Fitment
| Year | Make | Vehicle | Engine / trim |
|---|---|---|---|
| 2005–2008 | Dodge | Magnum | R/T & SRT-8, 5.7L / 6.1L HEMI V8 |
| 2006–2010 | Dodge | Charger | R/T & SRT-8, 5.7L / 6.1L HEMI V8 |
| 2008–2010 | Dodge | Challenger | R/T & SRT-8, 5.7L / 6.1L HEMI V8 |
| 2005–2010 | Chrysler | Chrysler 300 | C Sedan & SRT-8, 5.7L / 6.1L HEMI V8 |
2008–2010 Dodge Challenger R/T & SRT-8 HEMI V8 Cold Air Intake FAQs
Q1: Is this cold air intake legal in my state?
A1: Not legal for sale or use in California (and other CARB-adopting states). Check applicable local emissions requirements before ordering.
Q2: Will this fit my 2010 Dodge Challenger?
A2: It fits the 2010 Dodge Challenger R/T and SRT-8 with a 5.7L or 6.1L HEMI V8. It is not listed for the Challenger SE or other V6 applications.
Q3: Does this fit a 2010 Dodge Challenger R/T cold air intake application?
A3: Yes, the 2010 Challenger R/T 5.7L HEMI V8 is in the exact-fit list. Confirm the engine and trim before ordering.
Q4: How much horsepower will this add?
A4: The listed performance range is approximately 5–10% horsepower and 6–8% torque. Some applications may see figures around 14 hp and 13 lb-ft; actual results depend on the vehicle, calibration, installation, and supporting hardware.
Q5: Will a cold air intake improve my MPG?
A5: MPG is dominated by driving habits; an intake alone cannot guarantee a measurable gain. Expect the main benefit as throttle response and intake tone rather than fuel economy.
Q6: Will this void my warranty?
A6: Under the Magnuson-Moss Warranty Act, an aftermarket part cannot void your factory warranty unless it is proven to have caused the failure. Keep installation records and follow applicable vehicle-service requirements.
Q7: Will it throw a check engine light?
A7: A correct installation starts with secure clamps and properly connected components. Intake leaks or incorrect sensor installation can contribute to a check-engine light, so inspect those items if one appears.
Q8: Do I need a tune after installing?
A8: The listed application is intended for a basic installation on a stock vehicle. A tune may further optimize performance when this intake is combined with exhaust or other modifications.
Q9: How do I service the filter?
A9: The kit uses a washable, reusable oiled cotton filter. The listed service interval is approximately 100,000 miles; inspect and service it more often in dusty conditions, and avoid excess filter oil.
Q10: What does it sound like?
A10: Expect a deeper, sportier intake tone under acceleration. Sound is subjective and can be milder during steady cruising.
Q11: What is included?
A11: The Cold Air Intake option includes 1 × Performance Cold Air Intake. Verify the selected variant before ordering because the catch-can combination has separate fitment.
Q12: Is installation difficult?
A12: Plan for basic hand tools and approximately 45–90 minutes for a typical installation. Confirm all clamps and connections before operating the vehicle.
Fast Shipping Policy
Your order will be dispatched within 1-2 business days, and the package will arrive within your order's estimated date. Click for Shipping Policy
Easy Return Policy
Every order comes with a 30-day free return, provided the item is brand new, uninstalled, and in its original packaging. We cover return shipping for quality issues. Refunds are processed within 3-5 business days. Click for Return Policy
Worry-Free Delivery Protection
Add Worry-Free Delivery at checkout — if it's lost, stolen, or damaged, you're 100% covered. Click for Worry-Free Delivery Protection