EGR delete kit for 2008, 2009, 2010 6.4L Ford Powerstroke. EGR delete stands for exhaust gas recirculation delete and is used in gasoline and diesel engines. With this EGR delete kit, you can remove your EGR valve & EGR cooler. It is designed to recirculate engine coolant faster and more efficiently than the stock EGR system.
2008 Ford F250 F350 F450 6.4L PowerStroke V8 Diesel
2009 Ford F250 F350 F450 6.4L PowerStroke V8 Diesel
2010 Ford F250 F350 F450 6.4L PowerStroke V8 Diesel
- Improved Fuel Economy and Engine Longevity
An EGR delete helps you restore your diesel engine’s power levels which, in turn, also restores your overall fuel efficiency. Since an EGR delete kit sends the exhaust gas away from your car’s engine, it starts to run cleaner, too. Not only does it make the process increasingly efficient, but it also reduces the chances of DPF (diesel particulate filter) failure. So, overall, with this aftermarket kit, you can see an increase of up to 20% in your fuel economy. Along with that, the EGR delete kit can also improve your engine’s longevity.
- Reduced Engine Temperature
EGR valves naturally contain a high content of soot. When the EGR system’s valve or coolers get clogged with soot, the exhaust gases start to circulate more around the system, resulting in a blockage. As a result, the temperatures around the engine rise and you experience a reduction in the engine’s power. However, when you bypass this with EGR delete kit, lower exhaust gas is produced, helps your vehicle to clean the intake air and reduce engine temperature
In addition, an EGR delete can also help you save money on some costly repairs. The EGR, if damaged, can be quite costly to repair and replace. An EGR delete removes the possibility of such damage, thereby saving your money.
This EGR removal kit and intake elbow kit can achieve faster turbine rotor, lower engine temperature, and more ground power, and increase Ford 6.4L by circulating engine coolant faster than ordinary EGR system The reliability of the power stroke engine. It is used to reduce the temperature of the coolant and to ensure that the intake manifold is not affected by power predation, hot and smoky air.
Special note: Race adjustment must be carried out to prevent the engine check light from turning on.
Brand Name: FlASHARK
Material: Aluminum alloy
Equipment: Ford Powerstroke 2008-2010 6.4L
Compatible Engine: Ford 6.4L power stroke diesel
Type: Engine EGR valve removal kit
Product size: 1.97 inches * 5.9 inches * 1.97 inches
Upgraded Package Includes:
1 * Exhaust Block-Off Plate
1 * Exhaust Gasket
2 * Coolant Line Plugs with O-rings
1 * Brass Barbed Hose Connector
1 * Stand-Off Spacer
4 * M8-1.25 x 40 Hex Head Bolts(Exhaust Manifold)
2 * M8-1.25 x 25 Hex Head Bolts
2 * M8-1.25 x 16 Hex Head Bolts
4 * M6-1.25 x 25 Flanged Hex Head Bolts
2 * Plastic Hose Routing Clips
1 * Intake Elbow with O-ring
The Ford 6.4L EGR removal kit is dedicated to off-road use.
All DPF / EGR-OFF tuning products are strictly used for competition.
Not to be sold or used on any pollution-controlled vehicles in California.
According to the EPA's "Clean Air Act", they are illegally used on any federal, state, or local public highway, and they should be punished in accordance with the penalties established by the aforementioned laws.
Before buying, please check your local, state, and federal laws!
We sincerely hope the installation instructions will help you. Please feel free to ask any questions！