For 1994-2001 Acura Integra DC2 GS LS RS 1.8L Cold Air Intake Kit

1994–2001 Acura Integra 1.8L Cold Air Intake Kit

This Integra cold air intake kit gives the listed Acura Integra 1.8L L4 applications a complete replacement for the factory intake setup, with dual 70 mm aluminum pipes and a dry red cone filter. Its configuration is built around the supplied pipes, couplers, brackets, and PCV breather hose for the specific Fitment list below.

Specifications

Key Features

• Dual 70 mm aluminum pipe system: Two black powder-coated aluminum pipe sections form the intake path supplied with this kit.
• Dry red cone filter: The washable cone filter uses dry media, so no filter oil is required during servicing.
• Matched silicone connections: The kit includes both a straight Φ70 × Φ70 coupler and a reducer Φ70 × Φ63 coupler for the specified connection points.
• Vehicle-specific mounting hardware: Two aluminum mounting brackets, a filter clamp, four narrow-band clamps, bolts, and washers are included.
• PCV breather hose included: The supplied 10 × 430 mm hose is part of the kit’s connection layout; check every hose and clamp for a secure installation before starting the vehicle.
• Bolt-on installation scope: The listed package is designed to attach at the factory mounting points without cutting or welding.

Who This Kit Is For

This Acura Integra air intake kit is for the exact 1994–1996 RS, LS, and Special Edition or 1997–2001 GS and LS 1.8L L4 applications shown in the Fitment table.

It is a fit for you if:

• You have confirmed your year, trim, and 1.8L L4 engine against the table.
• You want a dry, washable cone filter that does not require oil.
• You want the listed pipe, coupler, bracket, clamp, and breather-hose components in one kit.

It is not a fit for you if:

• Your Integra is a GSR with a B18C1 or a Type R with a B18C5.
• Your year and trim do not appear in an Exact row above.
• You require a California-legal intake with a published CARB EO for your vehicle.

Check Before Ordering

1. Verify fitment: Match year, model, trim, and 1.8L L4 engine to an Exact row. Contact support before ordering if any of those details differ.
2. Confirm the kit configuration: This kit includes two Φ70 mm pipes, a dry cone filter, couplers, PCV breather hose, brackets, clamps, and hardware as listed below.
3. Plan filter service: The filter is dry and requires no oil. Remove debris, wash with appropriate filter cleaner, rinse, and allow it to dry completely before reinstalling.
4. Check every connection: Confirm the PCV breather hose and clamps are seated securely during installation.
5. Check emissions rules: Not legal for sale or use in California (and other CARB-adopting states).
6. Consider water exposure: Avoid deep water crossings. Water ingestion can cause hydrolock and severe engine damage.

What's in the Box

• ✓ Main Φ70 mm intake pipe, long curve × 1
• ✓ Secondary Φ70 mm intake pipe with Φ10 mm breather nozzle × 1
• ✓ Red cone air filter with Φ70 mm inlet × 1
• ✓ Air-filter clamp × 1 and narrow-band clamps × 4
• ✓ Straight silicone coupler Φ70 × Φ70 × 1
• ✓ Reducer silicone coupler Φ70 × Φ63 × 1
• ✓ PCV breather hose, ID 10 mm, 430 mm length × 1
• ✓ Small hose, 410 mm × 1
• ✓ Aluminum mounting brackets, 76 × 18 × 1.5 mm and 165 × 18 × 1.5 mm × 2

Shipping & Returns