EGR delete kit for 2007, 2008, 2009, 2010 6.6L Chevy GMC LMM Duramax Diesel. EGR delete stands for exhaust gas recirculation delete and is used in gasoline and diesel engines. With this EGR delete kit, you can remove your EGR valve & EGR cooler. It is designed to recirculate engine coolant faster and more efficiently than the stock EGR system.
This is the ordinary version. The upgraded version EGR delete kit for 2007.5-2010 6.6L Chevy Silverado GMC Sierra Duramax LMM Diesel has an additional high flow intake tube so that the coolant can circulate, which will bring 5°C cooling compared to the ordinary version.
2007.5-2010 GMC Sierra 2500 3500 HD 6.6L LMM Duramax Diesel
2007.5-2010 Chevrolet Silverado 2500 3500 HD 6.6L LMM Duramax Diesel
- Improved Fuel Economy and Engine Longevity
An EGR delete helps you restore your diesel engine’s power levels which, in turn, also restores your overall fuel efficiency. Since an EGR delete kit sends the exhaust gas away from your car’s engine, it starts to run cleaner, too. Not only does it make the process increasingly efficient, but it also reduces the chances of DPF (diesel particulate filter) failure. So, overall, with this aftermarket kit, you can see an increase of up to 20% in your fuel economy. Along with that, the EGR delete kit can also improve your engine’s longevity.
- Reduced Engine Temperature
EGR valves naturally contain a high content of soot. When the EGR system’s valve or coolers get clogged with soot, the exhaust gases start to circulate more around the system, resulting in a blockage. As a result, the temperatures around the engine rise and you experience a reduction in the engine’s power. However, when you bypass this with EGR delete kit, lower exhaust gas is produced, helps your vehicle to clean the intake air and reduce engine temperature
In addition, an EGR delete can also help you save money on some costly repairs. The EGR, if damaged, can be quite costly to repair and replace. An EGR delete removes the possibility of such damage, thereby saving your money.
Coolant temperature runs cooler because they are not running through EGR Cooler. Eliminates soot build-up and clogged EGR Valves. Hot exhaust gasses are not being re-routed back into the motor.
Does not Require removal of turbo, intake manifold, or up-pipe
CNC Machined Billet Aluminum and Stainless Steel
2 x Billet Intake Block Off Plate with O-ring
2 x Hose Clamps
2 x M8 Flange Nuts
2 x M8 x 20 Cap Head Bolts
2 x M8 x 30 Cap Head Bolts
2 x M8 x 25 Hex Head Bolts
2 x M10 x 20 Hex Head Bolts
1 x "U" Shaped Coolant Tube
1 x Exhaust Block Off Plate
1 x Intake Support Bracket
1 x Support Bracket Washer