Product Specifications
2015-2020 Ford F-150 5.0L V8 Coyote Cold Air Intake Kit
Give your 5.0L Coyote a more noticeable intake tone under acceleration with this Flashark cold air intake kit for the 2015-2020 Ford F-150. It replaces the factory airbox, paper filter and corrugated inlet hose with a smooth aluminum tube, a washable dry cotton cone filter, and a heat shield with a filter cover. The open-element layout brings a more direct intake sound while the included parts retain the factory MAF sensor.
Specifications
| SKU | FLBQM0003001 |
|---|---|
| Product-page part number | BQM0003001 |
| Brand and type | Flashark cold air intake kit |
| Intake tube | 3.5-inch (89 mm) mandrel-bent aluminum; black powder-coated finish |
| Filter | Red, washable, reusable dry cotton gauze; open-element cone |
| Heat shield | Black powder-coated steel dual baffle plates with filter cover |
| MAF sensor | Reuses the factory sensor with the included adapter |
| Installation | Factory mounting points; basic hand tools; approximately 45-60 minutes; no cutting or drilling |
| Warranty | 1 year |
Key Features
- Mandrel-bent aluminum tube: The 3.5-inch black powder-coated tube replaces the corrugated factory inlet hose and its baffles with a smoother intake path.
- Washable dry cotton filter: The oversized red cone filter needs no filter oil and can be cleaned and reused.
- Heat shield and filter cover: Black powder-coated dual steel baffles separate the filter area from nearby engine and radiator heat.
- Factory sensor integration: The included adapter accepts the original MAF sensor; inspect the sensor connection and couplers during installation.
- Direct intake sound: The open-element filter gives the Coyote a deeper intake tone under acceleration; sound is less prominent at idle and steady cruise.
- Response under load: Reduced inlet restriction is intended to make throttle response feel more immediate during acceleration, passing and towing; results vary with the truck and operating conditions.
- Long filter service interval: Inspect the dry filter regularly and clean it approximately every 10,000-15,000 miles with mild soap and water, more often in dusty use; let it dry completely before reinstalling.
Who This Kit Is For
This kit is for 2015-2020 Ford F-150 owners with the 5.0L V8 Coyote who want a reusable filter and a more audible intake under acceleration. It suits owners replacing the factory airbox and inlet tube and willing to maintain a washable filter. If you need a different Ford intake configuration, browse Ford air intake kits or Ford F-150 intake kits and confirm the engine before choosing a kit.
Check Before Ordering
- Match your model year and 5.0L V8 Coyote engine to the Fitment table. For a Raptor or an engine not shown, contact us with your exact vehicle details first.
- This kit uses an open-element cone filter, heat shield and filter cover. Consider that layout and the intake sound when choosing your setup.
- Transfer your factory MAF sensor to the included adapter. Check the factory sensor, couplers, clamps and breather-hose connections during installation.
- Use basic hand tools and allow approximately 45-60 minutes. Installation uses factory mounting points without cutting or drilling; check every connection after the first few heat cycles.
- Keep the dry filter free of excess dirt; wash with mild soap and water at approximately 10,000-15,000 miles or sooner in dusty conditions, and reinstall only when fully dry.
- Confirm your local emissions rules before ordering; see the Compliance Notice below.
What's in the Box
- ✓ 3.5-inch black powder-coated aluminum intake tube
- ✓ Red, washable dry cotton cone filter
- ✓ Black powder-coated heat shield, dual baffle plates and filter cover
- ✓ MAF sensor adapter, silicone couplers and clamps
- ✓ Installation instructions
Shipping & Returns
Free U.S. Shipping: Orders are typically processed within 1–2 business days and delivered within 7–9 business days. Additional charges may apply to remote areas.
30-Day Returns: Unopened and unused items in their original packaging may be returned within 30 days of receipt. Return shipping is covered for verified quality issues.
Worry-Free Delivery: Optional protection against eligible loss, theft, delay, or transit damage is available at checkout.
